Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1.0 Date: 30/11/2019 Author: ERC Page 12 of 610 Copyright by TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without our consent P060B- 00: Internal Control Module A/D Processing Performance Overview: Code Cause Effect on Vehicle Fault Code: P060B-00 1. ECU connection 2. ECU hardware malfunction 1.CE Lamp On 2.Engine won’t start Checkpoints: Check Battery Voltage Trouble Shooting Steps: Sr. No. Steps Specifications Step 1 Check ECU connector connected properly Physical check Step 2 Check all sensor connectors are connected properly & working correctly Physical check Step 3 If the problem persists, replace the ECU Circuit Description: ECM continuously monitors its internal memory status, internal circuits. These are basically self-checks that insure that ECM is functioning properly. If any malfunction is detected, ECM will set the DTC. ECM is supplied voltage from the battery positive supply through Main relay. ECM ground connection is connected to the battery negative supply. ECM functionality critically depends on ensuring proper ground connection. Circuit Schematic Diagram: Component location and image:
RkJQdWJsaXNoZXIy MTIwNTUz