Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1.0 Date: 30/11/2019 Author: ERC Page 162 of 610 Copyright by TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without our consent P0238-12: Turbocharger/Supercharger Boost Sensor "A" Circuit High Overview: Code Cause Effect on Vehicle Fault Code: P0238- 12 1. T-Map sensor Short to Battery 2. ECU connection 3. Electrical wiring 4. Wiring connector breakage 5. T-Map sensor defective 1.MIL Lamp On Component Details: The sensor serves to measure the absolute intake-manifold pressure as well as the temperature of the intake air stream of internal-combustion engines. The piezo-resistive pressure sensor element and a suitable circuitry for signal amplification and temperature compensation are integrated on a silicon chip. The measured pressure operates from above to the active side of the silicon diaphragm. The temperature sensor element is an NTC-resistor. The sensor is installed after turbocharger at inlet manifold of the engine. Checkpoints: 1. Check wiring harness of Boost temperature (T-Map) sensor circuit 2. Check boost pressure & temperature sensor for any damage Trouble Shooting Steps: Sr. No. Steps Specifications Step 1 Check connector is connected properly Physical check Step 2 Check for continuity between sensor connector and ECU Harness Check the End to end continuity using multi-meter Step 3 Check the sensor physically Physical check Step 4 If the problem persists, replace the sensor - Circuit Schematic Diagram: Component Location and Image:
RkJQdWJsaXNoZXIy MTIwNTUz