NEXON AMT BS VI DTC Troubleshooting Guide Version: 2.3 Date: 23-07-2019 Author: Rahul N Page: 87 of 442 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. DTC’s confirmation:- After rectification, clear all DTC’s and ensure the following points by referring TCU parameters using TML diagnostic tool before handing over to customer. • After key ON with TML diagnostic tool connected, move the lever to each position and check corresponding position is correctly displayed in the tool. • Drive the vehicle through all gears in both Automatic and Manual modes and • Ensure no DTC is active and Transmission Fault Lamp is OFF. Circuit Schematic Diagram: Component Location & Image:-
RkJQdWJsaXNoZXIy MTIwNTUz