Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. SRS / Airbag ECU – DTC Troubleshooting Guide Version: 14.0 Date: 14-February-2017 Prepared by:Airbag COC Review & Approved by:Sanjeev VM Page: 539 of 548 B1033-55:- Inavlid CAN Node Selection not configured Overview:- ISO Code B1033-55 Customer Symptom N/A Fault Effects (On Vehicle) N/A Lamp Status (If Any) N/A Fault Detection Condition Max allowed crash entry done Normal Operating Condition No Max allowed crash entry happen. Probable Trouble Area CAN Node Healing Condition Select correct node configuration as per specific to platform Component Details:- Airbag ECU: - It is fitted in the floor of central console in the car. The Airbag Electronic Control Unit (ECU) controls the deployment system to allow an appropriate igniting of the Airbags and belt pre-tensioners to restrain the Driver and passengers. Preliminary Checks:- 1. Check Battery Voltage (12 V & above) 2. Check for any faults in Airbag Warning Lamp indication in Instrument Cluster. 3. Ensure the proper locking of Airbag ECU wiring harness connectors in the vehicle by the locking sound. Trouble Shooting:-
RkJQdWJsaXNoZXIy MTIwNTUz