FITMENT 1. Slide fit the WSS connector to the speed sensor mounting clip in the direction of arrow as shown in below figure. 2. Connect the electric connector of Wheel Speed Sensor to main Wiring harness. 3. Mount the Wheel Speed Sensor to the bracket using two Double Trumpet Grommet and one Single Trumpet Grommet. 4. Mount the WSS head onto the Steering Knuckle using HFL Screw M6X14 and tighten with a torque of 0.8 to 1.0 kg-m. NOTE 1. Avoid twisting of cable during and after fitment on vehicle. 2. Avoid the sensor cable holding/touching to risk of cable stress while grommet fixation into bracket slot. 3. WSS grommet fixing, connector parking with clip on BIW & electric connection to be done. BRAKES 22
RkJQdWJsaXNoZXIy MTIwNTUz