HV ELECTRICAL SYSTEM_ELR 61 10. Remove drive shaft by pulling disk brake and Take out drive shaft LH / RH from gearbox. (Drain oil before carrying out this process). 11. Remove the mounting screws and take out the Front Frunk Assembly. 12. Remove the connector cable connected between 3in1 Assy. & E-Drive. 13. Disconnect the wiring harness of E Drive. 14. Remove of ground cables of E-drive. 15. Remove the Hose Pipe Motor OUT and drain coolant.
RkJQdWJsaXNoZXIy MTIwNTUz