HV ELECTRICAL SYSTEM_ELR 73 NOTE Use special Lifter Trolley tool to keep HV battery. Image for illustration purpose only 12. Loosen and Remove the mounting screws of HV battery assembly safely take out (use Special tool). Image for illustration purpose only Fitment Follow reverse procedure for HV battery assembly considering following points. Align battery pack using hydraulic trolley/scissor lift with vehicle from bottom side. Lift the Battery pack to match the vehicle underbody cavity and mounting holes of pack are coincided to the BIW bush holes. Fasteners M10X1.25X55 (b), Spring washer B10 (c) & Hardened washer 10.5 (d) are to be pre-assembled at all 14 locations and hand tight all. Once all the bolts are hand tightened and fitment is ensured, pack is ready to be mechanically torqued. Tightening torque of 4.9 kgfm is applied on all 14 fasteners. While torquing, the bolts must be torqued in the following order to ensure correct fit of the battery pack, - 3 &12 - 14 & 5 - 6 &11 - 1 & 2 - 4 &13 - 10 & 7 - 8 & 9
RkJQdWJsaXNoZXIy MTIwNTUz