HV ELECTRICAL SYSTEM_ELR 81 9. Remove tail gate trim (refer removal from body section) 10. Loosen and Remove the ground terminal cable screw. 11. Remove HV Battery (refer HV Battery removal from section). 12. Remove electrical connection and take out the HV charger cable. Fitment Follow reverse procedure for assembly. B. CCS2 INLET ACTUATOR REPLACEMENT PROCEDURE 1. Dismantle the signal connector from Actuator. a. Press and move the CPA to preposition as indicated. b. Remove the connector from Actuator.
RkJQdWJsaXNoZXIy MTIwNTUz