NEXON 2.0 EV DTC Troubleshooting Document for VCU Version: 1.0 draft Date: 31-Jan-2022 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. connector’s pin CAN H and CAN L Action: Change GSS to VCU inline wiring harness Go to Step 7 7 Remove the LV connector of VECU Check if there is continuity between VECU side connector pin CAN H and CAN L Check for damage in VECU connector Action: Replace VECU side connector No problem in VECU side LV connector Go to step 8. 8 Remove the LV connector of VECU Check if there is continuity between pin CAN H and CAN L of VECU Check for damage in VECU pin Action: Replace VECU DTC’s confirmation: - After rectification, send Clear DTC command by using TML diagnostic tool. Ensure no DTC is in defect/ confirmed state before handing over to the customer. Circuit Schematic Diagram: Refer Sheet 61 of LV Schematic for details
RkJQdWJsaXNoZXIy MTIwNTUz