`180 Author: Navya Krishnan/Satyajit Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Kanger 2.0 DTC Troubleshooting Data Version: 1.0 Date: 15-Feb-2022 Pre-Check Points:- a) Check whether the AC supply Voltage is normal b) Check for the proper connection of OBC AC input connector. TroubleShooting:- Flow Diagram or table format for diagnosing the fault code Step no. Description Check Point if YES if NO 1 Connect the Charging Gun & switch ON the AC supply. Check for the fault code. Fault code P19D017, is present? Go to step 2 Repair complete 2 Replace the Charging Gun Fault code P19D017 is present? Record Local Snapshot of DTC. Replace 3in1 combo unit Recheck fault code Go to 1 DTC’s confirmation:- After rectification, ensure the following points by referring OBC parameters using TML diagnostic tool before handing over to customer. a) Check whether the OBC can respond to the vehicle charging command by observing the Charge ON indicator lamp on the cluster.
RkJQdWJsaXNoZXIy MTIwNTUz