Gravitas/SAFARI/X451/NEXON FATC DTC Troubleshooting Data Version: 1.1 Date: 28-Apr-2021 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 205 of 244 B1F4F-02:- CCM configured as Single while CCH as Dual (Zone 3) – General signal Failure Still DTC is present Yes Disconnect CCM and connect other CCM which is configured as signal zone No Is DTC Present? Yes No Stop 1 . Connect the TML Diagnostic Tool. 2 . Turn the Ignition ON 3 . Check the status of DTC’s (Memorized/Current) . Record the DTC & Clear 4 5 . Turn Ignition OFF & ON 6 . Verify If B1F4E - 11 02 is present Stop
RkJQdWJsaXNoZXIy MTIwNTUz