FATC Replacement Procedure TITLE : FATC Replacement Procedure Doc No: 2921 02 217 A1198 Date: 26th Feb 2020 Revision: 4.0 Page: 2 of 9 Prepared : Kaustubh \Ravi S Checked: Sanjay Jaisingh Approved: Anand Sikchi This specification is the exclusive property of Tata Motors Limited. Without their consent it may not be reproduced or given to third parties. The above specifications are subject to change and therefore suppliers are requested to refer the latest one. CONTROLLED COPY FOR RESTRICTED CIRCULATION © TATA MOTORS LTD. Document History Version Date Author Details 1 3rd February 17 Vinisha \Valentina Base reference as Kite 5 V4 Document, updated section 2.1,3.1.2 2 30th June 2017 Vinisha \Valentina Removed DID 7244 from Section 3.1.2 as in the PLM of Osprey the value is given a value other than NA. Due to this the server and FATC data will never match as in FATC the value for DID 7244 is NA. 3 17th Oct 2019 Kaustubh 1)Removed SW Check with Server as there may be a mismatch between the old ECUs Sw and the SW on server. 2) Instead Hardware Number(F192) is compared to ensure proper HW is used. 3)Flashing loop removed which was enabled if SW mismatch was observed. 4)Changes are highlighted in ‘Turquoise’ 4 26th Feb 2020 Ravi Write configuration for Xpress cool DID 4AFA for Nexon_MCE Only . Changes are highlighted in ‘Turquoise’
RkJQdWJsaXNoZXIy MTIwNTUz