`56 Author: Prashant Ghadigaonkar/ Pooja Jaiswal/ Samir Tikhe Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Kangar 2.0 DTC Troubleshooting Data Version: 1.0 Date: 11-11-2021 P3098 – 09 :- Drive motor A Phase current sensor - Component Failures Overview:- ISO Code (If applicable) P3098 – 09 Customer Symptom Vehicle will stop. Fault Effect (On Vehicle) Vehicle goes from D-N Mode and Vehicle Can’t be Cranked Lamp Status (If Any) HV critical alert lamp on cluster glows DTC Trigger Condition Voltage Amplitude value<15V Current sensor is disconnected or not firmly connected Current sensor failure Probable Trouble Area Sensor failure. Healing Condition Ignition Reset Write up for the system:- E-drive is a three in one unit which consist of Electric motor, Motor Controller Unit and Gear- Box, Where this unit draws power from the High voltage battery and convert that electric powerinto kinetic energy which helps to rotate the vehicle. During braking vehicle kinetic energy convert in to electric energy. LV signal HV BATTERY E-DRIVE WHEEL
RkJQdWJsaXNoZXIy MTIwNTUz