Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date:31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 82 Trouble Shooting: 1.CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITION ON. 3.CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4. 4.RECORD THE DTC AND CLEAR. 5.TURN IGNITION OFF & ON. 6.VERIFY IF DTC C1054-54 IS PRESENT 1. PERFORM PRESSURE SENSOR CALIBRATION FROM TDS TOOL (FOOT OFF BRAKE PEDAL) 2.TURN OFF IGNITION FOR 20 SECONDS 3.CHECK & CLEAR DTC IF ANY DTC’s healing confirmation: If the ABS/ESC/AVH/HDC lamp on Instrument Cluster goes OFF, DTC is healed. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Component/Connector Location & Image: Please refer to Annex 3 . Connector View & Information: Please refer to Annex 2 . Inspection Method: N.A STOP
RkJQdWJsaXNoZXIy MTIwNTUz