Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 113 Trouble Shooting: 1. CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITION ON. 3. CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4. RECORD THE DTC AND CLEAR. 5. TURN IGNITION OFF & ON. 6. VERIFY IF DTC U1604-56 DTC’s healing confirmation: If the ABS/ESC/EBD lamp on Instrument Cluster goes OFF, DTC is healed. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Component/Connector Location & Image: Please refer to Annex 3 . Connector View & Information: Please refer to Annex 2 . Inspection Method: N.A START 1. C LEAR DTC 2. TURN IGNITION OFF & ON. 3. WAIT FOR 5 SEC WRITE VALID VARIANT MATCHING TO ACTUAL VEHICLE CONFIGURATION USING DIAGNOSTIC SERVICE 1.CLEAR DTC 2.PERFORM IGNITION CYCLE (20SEC)
RkJQdWJsaXNoZXIy MTIwNTUz