Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 119 Trouble Shooting 1. CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITION ON. 3. CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) RECORD THE DTC AND CLEAR. 4. TURN IGNITION OFF & ON. 5. VERIFY IF DTC U1014-09 PRESENT DTC’s healing confirmation: After fault rectification at Ignition line of I VBAC ECU, DTC is healed. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Component/Connector Location & Image: Please refer to Annex 3 . Connector View & Information: Please refer to Annex 2 . Inspection Method: CHECK IGN FUSE & REPLACE IF FOUND DEFECTIVE. CHECK FOR LINE INTERRUPTION FOR PIN NO 6. CHECK FOR PIN BACK OUT AT PIN NO 6 STOP
RkJQdWJsaXNoZXIy MTIwNTUz