Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 172 Trouble Shooting: 1.CONNECT THE TML DIAGNOSTIC TOOL. 2.TURN THE IGNITION ON. 3.CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4.RECORD THE DTC AND CLEAR. 5.TURN IGNITION OFF & ON. 6.VERIFY IF DTC C1032-12 PRESENT DTC’s healing confirmation: After fault rectification, AVH/APB lamp on Instrument Cluster goes OFF. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Component/Connector Location & Image: Please refer to Annex 3 . Connector View & Information: Please refer to Annex 2 . Inspection Method: N.A NO I S T H ER E A N Y S H O R T C I R C U I T YES RE M O V E S H O R T C I R C U IT C H E C K A P B M O T O R W I R I N G H A RN E SS F O R S H O R T C I R C UI T CHECK SHORT CIRCUIT BETWEEN PIN NO 12 WITH BATTERY UBAT pin no1 REPLACE APB MOTOR LH C H E C K & C L E A R D T C s
RkJQdWJsaXNoZXIy MTIwNTUz