Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 183 Trouble Shooting 1.CONNECT THE TML DIAGNOSTIC TOOL. 2.TURN THE IGNITION ON. 3.CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4.RECORD THE DTC AND CLEAR. 5.TURN IGNITION OFF & ON. 6.VERIFY IF DTC C1031-16 PRESENT DTC’s healing confirmation: If the APB/AVH lamp on Instrument Cluster goes OFF, DTC is healed. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Connector View & Information: Annex 2 Component/Connector Location & Image: Please refer to Annex 3 . NO I S T H ER E A N Y S H O R T C I R C I YES RE M O V E S H O R T C I R C U IT CORRECT INPUT VOLATGE FROM BATTERY C H E C K A P B M O T O R W I R I N G H A RN E SS F O R S H O R T C I R C UI T 1.CHECK BATTERY VOLTAGE, IT SHOULD BE IN RANGE (10V TO 16V) 2.CHECK APB CONNECTION ON BOTH RH & LH SIDE. REPLACE I VBAC ECU IF DTC STILL PERSISTS C H E C K & C L E A R D T C s IS VOLTAGE I RANGE
RkJQdWJsaXNoZXIy MTIwNTUz