Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 190 C104E-1C :- Brake Pedal Travel Sensor "A"-Circuit Voltage Out of Range:- Brake Pedal Overview: ISO Code C104E-1C Customer Symptom Warning Light Displayed Fault Effects (On Vehicle) EBD – Available ABS & ESC – Depends on fault Lamp Status (If Any) ABS & ESC Depends on fault type EBD – OFF Fault Detection Condition Pedal travel sensor INCORRECT OUTPUT Normal Operating Condition Correct Pedal sensor signal is received from pedal travel sensor Probable Trouble Area 1. Wire Defective (Power short to BAT/GND) 2. Defective ECU internal pedal sensor power supply 3. Wire Defective (Sensor open, short to BAT/GND) 4. Defective pedal sensor. Healing Condition Repair wiring harness/replace I VBAC ECU. Component Details: Pedal Travel Sensor is located on Brake Pedal. It gives information of brake pedal travel to I VBAC ECU. Preliminary Checks: Not Applicable
RkJQdWJsaXNoZXIy MTIwNTUz