Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 293 Trouble Shooting: 1.CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITION ON. 3. CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4. RECORD THE DTC AND CLEAR. 5.TURN IGNITION OFF & ON. 6.VERIFY IF DTC C1064 -00 PRESENT DTC’s healing confirmation: If the APB & AVH lamp on Instrument Cluster goes OFF, DTC is healed. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Component/Connector Location & Image: Please refer to Annex 3 . Connector View & Information: Please refer to Annex 2 . Inspection Method: N.A IS DTC C1064-00 PRESENT STOP NO YES 1. PERFORM ‘EXIT MAINTENANCE MODE’ FROM ROUTINES TAB 2. CLEAR THE DTCs 3. TURN THE IGNITION OFF & WAIT FOR 20 SECONDS 4. MANUALLY, PERFORM APB APPLY & RELEASE CYCLE STOP
RkJQdWJsaXNoZXIy MTIwNTUz