Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 302 Trouble Shooting: 1.CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITION ON. 3. CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4. RECORD THE DTC AND CLEAR. 5.TURN IGNITION OFF & ON. 6.VERIFY IF DTC C1048 -00 PRESENT IS DTC C1048-00 PRESENT STOP NO YES 1. TRY TO RELEASE/ APPLY PB THROUGH APB SWITCH 2. CHECK AND CLEAR DTC IN I VBAC ECU. 3. .PERFORM IGNITION OFF/ON( WAIT FOR 30 SECONDS) 4. VERIFY IF DTC C1048-00 IS STILL PRESENT & IF THE DTC STILL PRESENT THEN REPLACE I VBAC ECU STOP
RkJQdWJsaXNoZXIy MTIwNTUz