Kanger2.0: DTC Troubleshooting Document for BMS Version: 3.0 Date: 14th Jan 2022 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. P1229 - 1A:- BMS insulation fault first level alarm - circuit resistance below threshold Overview: ISO Code P1229 - 1A Customer Symptom NA Fault Effects (On Vehicle) NA Lamp Status (If Any) Tortoise Lamp with Limited perfromance Fault occurrence scenario(In the order of probability) Water Ingress Normal Operating Condition No fault Probable Trouble Area Insulation damage in HV sytem Healing Condition NA System Details: Battery insulation is moniterd by the BMS through the insulation monitoring device. Pack insulation can fail due water ingress. Preliminary Checks: Inspection Method: Connect the tool and communicate to the battery pack as instructed through APPENDIX-C Read DTC information of DTC ID – P1229 – 1A Rectification Action: 1) If DTC is appearing in real time, clear DTC information through service tool 2) If DTC is not appearing in real-time but has only occurred before, store the snapshot data. 3) Clear the DTC information on the respective DTC ID. DTC’s confirmation: After clearing, ensure the following points by referring to BMS DTC list. 1) Read DTC ID – P1229 – 1A for the existence of DTC information. 2) If DTC still exists, reflash the battery pack using the service tool with the latest release SW available in PLM database. 3) Read DTC ID – P1229 – 1A for the existence of DTC information post flashing. 4) If DTC still exists, the HV battery pack component has to be replaced as instructed by the respective ECU replacement guide Component Location & Image;Connector Location; Connector View & Information: - APPENDIX-A
RkJQdWJsaXNoZXIy MTIwNTUz