NEXON 2.0 EV DTC Troubleshooting Document for VCU Version: 1.0 draft Date: 31-Jan-2022 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. CAUTION: Ensure vehicle is not in crank state and gear selector is in Neutral position only while accelerator pedal check. 1. Ensure that accelerator pedal is not pressed 2. Read Parameter 342E (Accelerator pedal sensor 1 position) to confirm that value is greater than or equal to 0.5 V. 3. Completely press the accelerator pedal and hold. 4. Read Parameter 342E (Accelerator pedal sensor 1 position) to confirm that value is less than or equal to 4.7V. 5. Repeat the process from point 1 to 4 again and then release the accelerator pedal. Circuit Schematic Diagram: Component Location & Image: -
RkJQdWJsaXNoZXIy MTIwNTUz