NEXON EV MAX SERVICE MANUAL - DTC

NEXON 2.0 EV DTC Troubleshooting Document for VCU Version: 1.0 draft Date: 31-Jan-2022 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. P302F - 12: - PTC Contactor Low Side activation line - circuit short to battery Overview: ISO Code P302F - 12 Customer Symptom Passenger compartment heating does not take place even after heater is turned ON Fault Effects (On Vehicle) PTC does not operate. Passenger compartment heating not possible Lamp Status (If Any) NA Fault Detection Condition PTC contactor doesn’t close even when VCU provides ground to PTC contactor coil for activation PTC Contactor Low Side activation line short circuit to battery Normal Operating Condition VCU operates PTC contactor to close and open as per heating demand from vehicle/driver Probable Trouble Area LV wiring Harness PDU LV connector Inside PDU Powertrain VCU connector Healing Condition If DTC trigger condition is healed, DTC is present only in memory. However, cluster indication will be ON till one drive cycle of vehicle, until DTC is cleared using tester tool. Component Details: VCU operates PTC contactor to close and open as per heating demand from vehicle/driver. PTC is used for heating of passenger compartment. Preliminary Checks: Check for loose connection of LV wiring harness between VCU and PDU LV connector Check for damage to LV wiring harness connections between VCU and PDU LV connector Visually inspect PDU for damage

RkJQdWJsaXNoZXIy MTIwNTUz