NEXON 2.0 EV DTC Troubleshooting Document for VCU Version: 1.0 draft Date: 31-Jan-2022 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. P3031 - 13: - Traction cooling fast fan relay activation line - circuit open Overview: ISO Code P3031 - 13 Customer Symptom Radiator fan does not operate in fast mode Fault Effects (On Vehicle) Traction cooling fan does not operate in fast mode as per the VCU command Lamp Status (If Any) No specific lamp indication If temperature of traction system is reached above operable threshold, high temperature alert for motor is seen on cluster. Fault Detection Condition Open circuit of Traction cooling fast fan relay activation line Normal Operating Condition Based on the signal from VCU operation of fan in fast mode is enabled or disabled Probable Trouble Area LV wiring connections Intermediate connections Powertrain VCU connector Healing Condition If DTC trigger condition is healed, DTC is present only in memory. Component Details: Traction cooling fan is operated in fast mode as per the signal received from powertrain VCU. The on and off command is given depending on the temperature of traction components. Preliminary Checks: 1. Loose connection of LV wiring harness between VCU and actuator 2. Damage to LV wiring harness connections between VCU and actuator Trouble Shooting: - 1. Remove the LV battery connections. Step No. Description Check point If Yes If No
RkJQdWJsaXNoZXIy MTIwNTUz