Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1.0 Date: 30/11/2019 Author: ERC Page 201 of 610 Copyright by TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without our consent Step 2 Check the inlet ducts. If the inlet ducts are clogged; clean the inlet ducts and check the EGR operation No clogging Step 3 Check tappet condition & valve setting. Perform the necessary repairs in case of any problem Step 4 Check the pressure checking fault section for the injector diagnostics. Replace if the Injector is faulty Check Injector Step 5 Still the problem persists! Change the ECU Circuit Schematic Diagram: Component Location and Image: Connector View & Information - Wiring Harness Side P0269-00: Cylinder 3 Contribution/Balance Overview: Code Cause Effect on Vehicle Fault Code: P0269-00 MIL- Off CEL – On Immo Lamp – NA Message on IC - NA 1. Combustion leakage 2. Inlet manifold clogging 3. Improper injector 3 installation 4. Faulty injector Vehicle starts with engine vibration and abnormal noise. Torque reduction is active. Component Details: The Solenoid Valve Injectors are used to inject the desired fuel quantity based on the engine operating conditions into the combustion chamber. They are mounted at the cylinder head above the combustion chamber.
RkJQdWJsaXNoZXIy MTIwNTUz