DTC Troubleshooting Master Document for BMS Version: 1.0 Date: 30th Nov 2022 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. P30C3 - 68 :- BMS thermal runway fault - Event Information Overview: ISO Code P30C3 - 68 Customer Symptom NA Fault Effects (On Vehicle) Vehicle operation stops, Battery pack is disconnected Lamp Status (If Any) HV fault on Cluster and message pop on Cluster for safely evacuation Fault occurrence scenario (In the order of probability) Any operation Normal Operating Condition NA Probable Trouble Area Cell issue Software Bug in BMS Healing Condition NA System Details: BMS detects thermal or fire incident condition and gives thermal runway warning signal to customer over Cluster for safely evacuation. Preliminary Checks: 3) Ensure the vehicle is parked and not in charging. 4) Ensure that the vehicle is in ignition ON condition and monitor the DTCs. Inspection Method: Connect the tool and communicate to the battery pack as instructed through APPENDIX-C Read DTC information of DTC ID – P30C3 - 68 Rectification Action: 4) If DTC is appearing in real time, clear DTC information through service tool 5) If DTC is not appearing in real-time but has only occurred before, store the snapshot data. store the snapshot data. 6) Clear the DTC information on the respective DTC ID. DTC’s confirmation: After clearing, ensure the following points by referring to BMS DTC list. 5) Read DTC ID – P30C3 - 68 for the existence of DTC information. 6) If DTC still exists, re-flash the battery pack using the service tool with the latest release SW available in PLM database. 7) Read DTC ID – P30C3 - 68 or the existence of DTC information post flashing. 8) If DTC still exists, the HV battery pack component has to be replaced as instructed by the respective ECU replacement guide Component Location & Image; Connector Location; Connector View & Information: - APPENDIX-A
RkJQdWJsaXNoZXIy MTIwNTUz