NEXON 3.0 EV DTC Troubleshooting Document for VCU Version: 2.0 Date: 22-Sep-2023 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. P3033 – 12: - Traction Cooling Pump - circuit short to battery Overview: ISO Code P3033 - 12 Customer Symptom Coolant pump not working Fault Effects (On Vehicle) No coolant circulation in traction system- E-drive, DCDC, OBC. May lead to subsequent failure of over- temperature in traction system components during operation of driving/charging. Lamp Status (If Any) Service Indicator Lamp is ON, on the cluster If temperature of traction system is reached above operable threshold, high temperature alert for motor is seen on cluster. Fault Detection Condition As per Bosch base software Traction Cooling Water pump short circuit to battery. Normal Operating Condition Low voltage battery voltage between 8V – 14V. Recommended coolant present until prescribed level of coolant tank. Pump operated at requested duty cycle. Probable Trouble Area LV connector Damage/short circuit in wire harness Damage in pump Healing Condition 1. Remove the negative terminal of LV battery 2. Check Electrical circuit continuity on harness side and VCU side 3. Adjust the Traction Cooling Pump PWM Duty Cycle as per troubleshooting table Component Details: The TCS pump operates on LV supply. It has the following electrical connections: Switched supply voltage (+ve) UPump, Input signal / diagnosis connection (S = PWM) and Ground (terminal 31, GND, -ve).
RkJQdWJsaXNoZXIy MTIwNTUz