NEXON 3.0 EV DTC Troubleshooting Document for VCU Version: 2.0 Date: 22-Sep-2023 Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. P3060 - 68: - CCS DC Fast Charging- Removal of charge plug detected despite confirmed interlocking - event information Overview: ISO Code P3060 - 68 Customer Symptom Vehicle would not go into charging mode in fast charging Fault Effects (On Vehicle) The vehicle is drivable and slow charging is possible but DC Fast charging will not happen Lamp Status (If Any) Charging fault indication lamp is Blinking on the cluster Fault Detection Condition DC FAST charging stopped since removal of charging plug detected despite confirmed locking Normal Operating Condition DC fast charging is happening Probable Trouble Area Charging gun actuator and gun lock position feedback sensor Healing Condition If DTC trigger condition is healed, DTC is present only in memory Component Details: Charging gun lock actuator is used to lock the charging gun into inlet. Gun lock position feedback sensor is used for detecting actual movement of gun lock pin Preliminary Checks: Check physically if anything obstructing movement of the actuator pin Trouble Shooting: - Ste p No. Description Check point If Yes If No 1. Switch Vehicle to Ignition ON Mode Check for the fault code using TML diagnostic tool. If P305C -72, P305C73 or P3067 - 04 is present? If P3067-04 is present Go to Step 2 If P305C -72, P305C73 is present Go to Step 3 Go to step 4 2. Check for continuity Check for continuity between Charging Problem is in Charging Gun Lock Problem is in wiring harness between
RkJQdWJsaXNoZXIy MTIwNTUz