`111 Author: Navya Krishnan Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Kanger 3.0 DTC Troubleshooting Data Version: 1.0 Date: 24-July-2023 U313487:-External CAN Bus off Overview: ISO Code (If applicable) U U313487 Customer Symptom NA Fault Effect (On Vehicle) DCDC Converter is not charging LV battery. Vehicle stops when LV battery is completely drained Lamp Status (If Any) NA DTC Detection Condition This DTC gets logged if CAN controller bus off signal is set Normal Operating Condition CAN controller bus off signal is cleared Probable Trouble Area 1. The CAN bus is disturbed; 2. The Combo 3in 1 communication circuit is faulty and cannot receive messages Healing Condition Ignition OFF wait till VCU sleeps & Ignition ON Write up for the related system:- The component 3in1( DC-DC Converter, On-Board Charger and Power distribution unit)is used to charge LV battery, HV battery and act as junction box between HV power train components ( PTC, e-Compressor, HV battery, Fast Charging and MCU)
RkJQdWJsaXNoZXIy MTIwNTUz