`122 Author: Navya Krishnan Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Kanger 3.0 DTC Troubleshooting Data Version: 1.0 Date: 24-July-2023 Trouble Shooting:- Flow Diagram or table format for diagnosing the fault code Step no. Description Check Point if YES if NO 1 Remove the 12V LV battery negative terminal. After a minute connect the 12V LV battery negative terminal & "Ignition Switch" to ON position. Crank and wait for 2 minutes. Check for the fault code. Fault code P19D208 is Present? Replace 3in1 combo unit Repair complete. DTC’s confirmation:- After rectification, ensure the following points by referring DCDC parameters using TML diagnostic tool before handing over to customer. a) DCDC converter charging LV battery in the range of 8V to 16V b) OBC charges HV battery/V2X Charging
RkJQdWJsaXNoZXIy MTIwNTUz