TML Gen3 IVI DTC Troubleshooting guide Version: 0.4 Draft Date: 04-Aug-23 Author: Hemant Mitra Page: 218 of 584 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B1C5E-13: RVC/DMS Camera Output Power-circuit open Overview: Write up for the Related Sensor/Actuator or system: - RVC/DMS connector –When reverse gear is engaged, the HU HMI displays the rear-view information. Pre-Check Points: NO Trouble Shooting: - Below given flowcharts guides to troubleshoot the fault: ISO Code B1C5E-13 Customer Symptom User is unable to use rear view camera Fault Effects (On Vehicle) No Lamp Status (If Any) No Fault Detection Condition 1. User is unable to use rear view camera 2. This DTC gets logged when connection between infotainment silver box and RVC/DMS camera is open Normal Operating Condition When user engage the reverse gear, Rear view came image gets visible on HU HMI Probable Trouble Area • Wiring harness between silver box and RVC/DMS camera. • Silver box connector • RVC/DMS connector • Intermittent connector • RVC/DMS internal construction Healing Condition None
RkJQdWJsaXNoZXIy MTIwNTUz