TML Gen3 IVI DTC Troubleshooting guide Version: 0.4 Draft Date: 04-Aug-23 Author: Hemant Mitra Page: 458 of 584 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting:- Voltage fluctuates between 0V and 14V? A Yes Disconnect IPC ECU power supply connector. Check voltage b/w Connector A, pin no. 5 and Connector A, Pin no. 6 & Connector A, pin 8) No Is DTC Present? Yes No Stop 1. Connect the TML Diagnostic Tool. 2. Turn the Ignition ON 3. Check the status of DTC’s (Memorized/Current) 4. Record the DTC & Clear 5. Turn Ignition OFF & ON 6. Verify If DTC U3006 – 16 is present Replace wiring harness (Vehicle side) Check resistance between vehicle ground and ground at the power supply connector. Resistan ce < 1 Ω? (Continui ty check) No Yes To Check Continuity
RkJQdWJsaXNoZXIy MTIwNTUz