Gravitas FATC Gen 3 DTC Troubleshooting Data Version: 1.0 Date: 15-July-2023 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 30 of 301 Component Details: The actuator controls the position of the temperature blend door based on the voltage signal from the FATC module. Potentiometer, inside the actuator, sends a feedback signal to the controller and controller cuts off the voltage signal coming from the controller when the required door position is achieved. Preliminary Checks: Switch On the IGN & perform the following check. 3) Connect the Diagnostics tool & check the DTC fault code 4) Read ECU parameter, Target Position of Co-Driver Temperature Door Flap and Co-Driver Temperature Door flap Position (Internal Value) for actual and target position of Actuator Trouble Shooting:-
RkJQdWJsaXNoZXIy MTIwNTUz