NEW NEXON EV DTC MANUAL

Gravitas FATC Gen 3 DTC Troubleshooting Data Version: 1.0 Date: 15-July-2023 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 198 of 301 B1F37-23:- Max. Defrost Request Button-Signal Stuck Low Overview:- ISO Code B1F37– 23 Customer Symptom Max. Defrost Request Button cannot be manually selected Fault Effects (On Vehicle) Max. Defrost Request switch is stuck and air distribution mode is not changing to defrost mode Lamp Status (If Any) NA Fault Detection Condition Max. Defrost Request Button -Signal Stuck Low Normal Operating Condition Max Front Defrost Request push button shall be used to manually switch the air distribution to defrost mode and clearing/defogging the front windshield Probable Trouble Area Mode switch component failure. Healing Condition NA Component Details: Max Front Defrost switch Button is shown in above image. Max Front Defrost Request push button shall be used to manually switch the air distribution to defrost mode Preliminary Checks: Switch On the IGN & perform the following check. 1) Connect the Diagnostics tool & check the DTC fault code 2) If the fault code exists, refer the corrective actions

RkJQdWJsaXNoZXIy MTIwNTUz