Gravitas FATC Gen 3 DTC Troubleshooting Data Version: 1.0 Date: 15-July-2023 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Author: ERC Page: 244 of 301 B1F4F-02:- CCM configured as Single while CCH as Dual (Zone 3) – General signal Failure Still DTC is present Yes Disconnect CCM and connect other CCM which is configured as signal zone No Is DTC Present? Yes No Stop 1 . Connect the TML Diagnostic Tool. 2 . Turn the Ignition ON 3 . Check the status of DTC’s (Memorized/Current) 4. Record the DTC & Clear 5 . Turn Ignition OFF & ON 6 . Verify If B1F4E - 11 02 is present Stop
RkJQdWJsaXNoZXIy MTIwNTUz