`239 Author: Navya Krishnan Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Kanger 3.0 DTC Troubleshooting Data Version: 1.0 Date: 24-July-2023 shoot the same 3 Check V2V charging Gun for damage/ short circuit. Penetration of particles inside at both end. If V2V gun condition is not OK , then replace the gun and check the V2Vcharging function & If the fault code is present? Go to step 4 Resolved 4 Check for the source vehicle inlet, CCS2 OBC AC input harness for any damage/short circuit. If there is any issue with the harness, replace the CCS2 cable and check V2V charging function. & If the fault code is present? Store the DTC snapshot and Replace the 3in1 unit resolved DTC’s confirmation:- After rectification, ensure the following points by referring OBC parameters using TML diagnostic tool before handing over to customer. Check whether the OBC can respond to the vehicle discharge command during V2X mode by observing the v2x discharge indication on the cluste
RkJQdWJsaXNoZXIy MTIwNTUz