Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date:31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 90 Trouble Shooting: 1. CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITION ON. 3. CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4. RECORD THE DTC AND CLEAR. 5. TURN IGNITION OFF & ON. 6. VERIFY IF DTC C1053-64 IS PRESENT 1. PERFORM IGNITION OFF. 2. WAIT FOR 20 SECONDS. 3. DON’T PRESS BRAKE > 1SECOND. 4. PRESS BRAKE > 1 SECOND. 5. PERFORM IGNITION OFF 6. CLEAR DTC FROM MEMORY 7. VERIFY IF DTC C1053-64 IS PRESENT DTC’s healing confirmation: If the ABS/ESC lamp on Instrument Cluster goes OFF, DTC is healed. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Component/Connector Location & Image: Please refer to Annex 3 . Connector View & Information: Please refer to Annex 2 . Inspection Method: N.A NO YES REPLACE I VBA C ECU REPLACE I VBAC ECU
RkJQdWJsaXNoZXIy MTIwNTUz