Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 196 C104E-62 :- Brake Pedal Travel Sensor "A"-Signal Compare Failure Overview: ISO Code C104E-62 Customer Symptom Warning Light Displayed Fault Effects (On Vehicle) EBD – Available, ABS & ESC – Not Available Lamp Status (If Any) EBD – OFF, ESC & ABS – Depends on fault type Fault Detection Condition I VBAC system not functioning as expected Normal Operating Condition Correct Pedal travel information is received by I VBAC ECU Probable Trouble Area Pedal travel sensor Healing Condition Repair wiring harness of Pedal travel sensor/ Replace Pedal travel sensor Component Details: Pedal travel sensor is located on brake pedal assembly, It gives pedal travel information for I VBAC ECU internal function requirement. Preliminary Checks: 1. Check Pedal travel sensor wiring harness to I VBAC ECU, Check continuity between pins: I VBAC ECU 46 pin connector Pedal Travel sensor Connector 22 A 23 F 10 B 25 C 7 D 31 E There should not be any short circuit conditions.
RkJQdWJsaXNoZXIy MTIwNTUz