Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 214 C104F-14 :- Brake Pedal Travel Sensor "B"-Circuit short to ground/Open Overview: ISO Code C104F-14 Customer Symptom Warning Light Displayed Fault Effects (On Vehicle) EBD – Available, ABS & ESC – Not Available Lamp Status (If Any) EBD – OFF, ESC & ABS – Depends on fault type Fault Detection Condition I VBAC system not functioning as expected Normal Operating Condition Correct Pedal travel information is received by I VBAC ECU Probable Trouble Area Pedal travel sensor Healing Condition Repair wiring harness of Pedal travel sensor/ Replace Pedal travel sensor. Component Details: Pedal travel sensor is located on brake pedal assembly . It gives pedal travel information for I VBAC ECU internal function requirement. Preliminary Checks: Check Pedal travel sensor wiring harness to I VBAC ECU, There should not be any short circuit conditions. Check continuity between pins: I VBAC ECU 46 pin connector Pedal Travel sensor Connector 22 A 23 F 10 B 25 C 7 D 31 E
RkJQdWJsaXNoZXIy MTIwNTUz