Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 289 C1063-00 :- PBC-Assembly check not performed Overview: ISO Code C1063-00 Customer Symptom APB-Mi fault lamp and AVH fault lamp Fault Effects (On Vehicle) ABS,EBD,TCS, ESP , HHC & HBA - Available , APB will work in reduced mode AVH function will not be available. Lamp Status (If Any) ABS, EBD,TCS, ESP, HHC & HBA – OFF, APB lamp will blink AVH– ON Fault Detection Condition APB function and AVH function will not work Normal Operating Condition APB function and AVH function will work when Assembly check is done Probable Trouble Area Assembly check process needs to be done for APB function Healing Condition After running assembly check command from routines tab Component Details: APB – Automated parking brake is the system that mechanically holds the vehicle in standstill condition. Motor on either side of brake disc operates to build pressure on disc to hold the vehicle. Note: After rectification please give Ignition latch to heal the DTC.
RkJQdWJsaXNoZXIy MTIwNTUz