Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 297 Trouble Shooting: 1.CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITION ON. 3. CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4. RECORD THE DTC AND CLEAR. 5.TURN IGNITION OFF & ON. 6.VERIFY IF DTC C103C -94 PRESENT DTC’s healing confirmation: If the APB/AVH lamp on Instrument Cluster goes OFF, DTC is healed. DTC might still be present in the history and can be cleared. Circuit Schematic Diagram: Please refer to Annex 1 . Component/Connector Location & Image: Please refer to Annex 3 . Connector View & Information: Please refer to Annex 2 . Inspection Method: N. IS DTC C103C-94 PRESENT STOP NO YES 1. MANUALLY RELEASE APB THROUGH APB SWITCH 2. CHECK AND CLEAR DTC IN I VBAC ECU 3. PERFORM IGNITION OFF/ON( WAIT FOR 30 SECONDS) 4. VERIFY IF DTC C103C-94 IS STILL PRESENT & IF THE DTC STILL PRESENT THEN REPLACE I VBAC ECU STOP
RkJQdWJsaXNoZXIy MTIwNTUz