Kanger 2.0 iVBAC DTC Troubleshooting data Version: 1.0 Date: 31-March-22 Author: ERC, Chassis CoC This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Copyright © TATA MOTORS Ltd. P a g e | 317 Trouble Shooting: 1.CONNECT THE TML DIAGNOSTIC TOOL. 2. TURN THE IGNITION ON. 3. CHECK THE STATUS OF DTC’s (MENORIZED/CURRENT) 4. RECORD THE DTC AND CLEAR. 5.TURN IGNITION OFF & ON. 6.VERIFY IF DTC C103F -00 PRESENT DO AS NECESSARY IS DTC C103F-00 PRESENT STOP NO YES 1. TRY TO RELEASE/ APPLY APB THROUGH APB SWITCH PRESSING BRAKE PEDAL 2. CHECK AND CLEAR DTC IN I VBAC ECU. STOP IS DTC C103F-00 PRESENT STOP NO YES 1. CHECK CONTINUITY/DAMAGE BETWEEN LEFT MOTOR & I VBAC ECU WIRING HARNES 2. CHECK APB MOTOR LH CONNECTOR & LEFT PAD IF DTC C103F-00 STILL PRESENT, THEN REPLACE LEFT APB MOTOR ASSEMBLY
RkJQdWJsaXNoZXIy MTIwNTUz