`30 7 Author: Neha Patil/Ganesh Kalkekar Copyright © TATA MOTORS Ltd. This document must not be used in anyway, such as copying and redistributing to third parties, without the consent of author. Kanger 3.0 LR DTC Troubleshooting Data Version: 1.0 Date: 18-07-2023 P309E – 17 :- MCU 12V Control Supply - circuit voltage above threshold Overview: ISO Code (If applicable) P309E – 17 Customer Symptom Vehicle gets Stop. Fault Effect (On Vehicle) Vehicle goes from D-N Mode and Vehicle can’t be Cranked. Lamp Status (If Any) HV critical alert lamp on cluster glows DTC Trigger Condition This DTC is logged if the LV voltage to the E-drive is more than 16V. Probable Trouble Area Overvoltage: DC-DC converter is giving more voltage i.e. >16V at theoutput. Voltage sensor has failed. External power failure/Internal voltage detection circuit failure. Healing Condition Ignition Reset Write up for the system:- E-drive is a three in one unit which consist of Electric motor, Motor Controller Unit and Gear-Box, Where this unit draws power from the High voltage battery and convert that electric power into kinetic energy which helps to rotate the vehicle. During braking vehicle kinetic energy convert in to electric energy.
RkJQdWJsaXNoZXIy MTIwNTUz