Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1 Date: 23/11/2022 Author: ERC Page 33 of 834 Copyright by TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout our consent P060B- 00: Internal Control Module A/D Processing Performance Overview: Code Cause Effect on Vehicle Fault Code: P060B-00 1. ECU connector loose connection 2. ECU hardware malfunction. 3. ECU terminal pin bend/damage 1.CE Lamp On 2.LIMP HOME 3.Engine may not start 4. Drive mode may get disabled Lamp status: Check Engine Lamp on Malfunction Indicator Lamp off Checkpoints: Check Battery Voltage at ignition off (Nominal range 11.5V ~ 12.8V) Trouble Shooting Steps: Sr. No. Steps Specifications Step 1 Check whether the ECU connector is connected properly - Step 2 Check whether there is any ECU terminal pin damage or bend. Check for any burn marks. If found damaged, contact supplier - Step 3 Check all sensor connectors are connected properly& working correctly - Step 4 If the problem persists, replace the ECU - Verification condition: Drive the vehicle in city and highway condition Circuit Description: ECM continuously monitors its internal memory status, internal circuits. These are basically self-checks that ensure that ECM is functioning properly. If any malfunction is detected, ECM will set the DTC.
RkJQdWJsaXNoZXIy MTIwNTUz