Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1 Date: 23/11/2022 Author: ERC Page 136 of 834 Copyright by TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout our consent Checkpoints: Check Sensor Voltage supply at key ON (Nominal range ~ 5 V) Trouble Shooting Steps: Sr. No. Steps Specifications Step 1 Check whether the DP sensor connector is connected properly. Remove and connect again properly - Step 2 Check for continuity between DP sensor connector pins 1, 3, 2 and ECU pins A57, A49, A45 respectively. - Step 3 Check for any pin backout in ECU or DP sensor connector - Step 4 Check the ECU terminal pin for any damage or bend - Step 5 Check the ECU connector is connected properly - Step 6 Check the DP sensor physically - Step 7 If the problem persists, replace the sensor - Verification condition: Drive the vehicle in city and highway condition Circuit description: The differential pressure sensor measures the pressure drop between two points in the flow pattern. Two points are connected across DPF and pressure difference between these two points helps the ECU to find the soot loaded in the DPF Circuit Schematic Diagram: Component location and image:
RkJQdWJsaXNoZXIy MTIwNTUz