Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1 Date: 23/11/2022 Author: ERC Page 361 of 834 Copyright by TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout our consent minutes before checking O2 sensor functionality Step 6 If problem persists, replace the O2 sensor 2 - Verification condition: Drive the vehicle in city and highway condition. Component Details: The oxygen sensors use a heated circuit to warm up the sensor for fasterfeedback operation. The oxygen sensor may use three or four wires depending on the vehicle, two are usually used for the sensor feedback to EMS ECU and the other wires are for the heater to power the heated circuit. Three wire sensors are usually grounded through the exhaust system, and four wire sensors have a separate ground wire. The P0036 code refers to the sensor after the catalytic converter on bank 1, which is on the side of the engine with the #1 cylinder. The heater circuit may be supplied power or ground by the EMS ECU. Circuit Schematic Diagram:
RkJQdWJsaXNoZXIy MTIwNTUz