Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1 Date: 23/11/2022 Author: ERC Page 486 of 834 Copyright by TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout our consent P060C- 56: Internal Control Module Main Processor Performance - Configuration Overview: Code Cause Effect on Vehicle Fault Code: P060C-56 1. ECU connector loose connection 2. ECU hardware malfunction 1. CE Lamp On 2. Engine won’t start Lamp status: Check Engine Lamp on Malfunction Indicator Lamp off Checkpoints: Check Battery Voltage at ignition off (Nominal range - 11.5V to 12.8V) Trouble Shooting Steps: Sr. No. Steps Specifications Step 1 Check ECU connector is connected properly - Step 2 Check all sensor connectors are connected properly & working correctly - Step 3 If the problem persists, replace the ECU - Verification: Drive the vehicle in city and highway condition Circuit Description: HWI checks that, configuration sent through SPI to C3MIO, has been considered. Each time HWI layer will notice a C3MIO configuration fault, it will set a diagnostic error, which will be available through the dedicated API call. This fault can only be refreshed during power ON (to consider for calibration. Circuit Schematic Diagram: NA Component location and image:
RkJQdWJsaXNoZXIy MTIwNTUz