Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1 Date: 23/11/2022 Author: ERC Page 534 of 834 Copyright by TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout our consent P0513-00: Incorrect immobilizer key - EMS and VICM authentication failed Overview: DTC Code P0513-00 DTC Description as per ISO standard Incorrect immobilizer key - EMS and VICM authentication failed ECU Pin Number - Customer Symptom Vehicle cannot be started. Fault Effects (On Vehicle) Vehicle cannot be started. Lamp Status Immobilizer status lamp will turned ON. Fault Detection Condition (Root cause) This fault occurs when unlearnt/invalid key (Transponder key which is not paired to Immo) is used to start the vehicle. Normal Operating Condition Valid vehicle key is used for vehicle start. Successful authentication between Immo and EMS. Probable Trouble Area Immobilizer, transponder key (E-Key). Healing Condition After Successful Immo Pairing, In the same Ignition cycle if EMS / Immo hasn’t entered anti scanning mode. After Successful Immo pairing, give a power latch of 20 secs and turn the Ignition ON. Component Details: Immobilizer system is designed to prevent vehicle theft by electronically disabling the engine starting system. The engine can be started only with vehicle’s original immobilizer ignition key, which has an electronic identification programmed code. Immobilizer unit (ICU) is an add-on part on the ignition switch, fitted on the steering column. The engine can be started only with the vehicle’s original immobilizer ignition key. The electronic key communicates the identification code to ICU when the key is turned to the "Ignition ON" position. Engine will allow the Vehicle cranking only if the authentication between EMS and IMMO is successful and Transponder / key used for cranking is paired to the Immobilizer unit. Preliminary Checks Check whether the customer voice / view about the issue is matching with the fault effects mentioned above. If yes, go ahead with next steps. If not, check for other DTC’s presence. Check whether similar complaints are earlier reported. If yes, perform the preliminary checks with respect to earlier issue closure. As this fault is related to Key pairing between vehicle transponder / Key and immobilizer unit, check for faults in Immobilizer and rectify the fault by following its rectification procedure.
RkJQdWJsaXNoZXIy MTIwNTUz