NEW NEXON DTC MANUAL

Vehicle Platform & ECU Name DTC Troubleshooting Data Ver: 1 Date: 23/11/2022 Author: ERC Page 566 of 834 Copyright by TATA MOTORS Ltd. This document must not be used in any w ay, such as copying and redistributing to third parties, w ithout our consent 4 Are there any pins backed out from the Glow plug/EMS ECU Connector Rectify/Replace Connectors Go to Step 5 5 Is EMS ECU signal Pin A93 or pin A94 , short circuited to Ground?. Repair the harness as per the schematic Go to Step 6 6 Is glow plug physically Damaged Replace Glow plug Go to Step 7 7 Fault Still Persists? Replace glow plug and then Fault still persists then call hot line Follow the steps again for reconfirmation DTC’s confirmation (checks before handing over vehicle to customer):  After rectification perform actuator test for Glow plugs and ensure the result is positive  Check the errors at Ignition ON, engine running @ Idle & Fly-up with different vehicle speeds also  If error present, then rectify the errors.  Confirm that there are no errors logged by EMS before handing over vehicle to customer Circuit Schematic Diagram: Component Location & Image:

RkJQdWJsaXNoZXIy MTIwNTUz